Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

Alloy Wheel Refurbishment


Renovating alloy wheels. They do need many more looking after although alloy wheels look much better than your average metal wheel. Rain, wind and grit can hit the top of the alloys, brake dust can also go into the surface to ruin your alloy wheels. Just slightly scuffing the kerb may give your alloys a tough looking edge.

Then utilize a little grinding stone, a steel brush or even a flap wheel on a drill to smooth this out, if there is any mild impact destruction. Take away the minimum number of metal possible and again you may need some rubbing compound once you have got the area looking pretty smooth. The wheel will need to be polished, once all the impact damage and corrosion has disappeared. Use loads of elbow grease as you can to really get your wheels to as large a shine. Use a non-downy rag to apply the polish and then use a smooth material to buff it up. The following phase will be to give a re-lacquer to the wheels with clear coat lacquer using a narrow paint brush to utilize it. All should be available from most accessory shops along with your wheels should look as good as new.

There are two ways of refurbishing alloy wheels. One way will be to allow the professionals do it, or if the harm is just cosmetic the repairs can be carried out at home with a bit of elbow grease and a few tools. It is easier to work with alloy wheels when they are off the car. The first job will be to hide up the tyres and any painted areas with newspaper and masking tape on areas you do not want to be impacted. Loose or flaky lacquer http://www.mintalloys.co.uk/full-alloy-refurbishment-process.html can be removed with a wooden scraper, (avoid using metal scrappers in case they slip and damage more of the wheel).. Then the rest of the lacquer might be taken off with some form of paint stripper. Take the standard precautions to prevent the stripper coming into contact with the skin. Use someone rubbing compound with a damp cloth to disguise any small pitted areas, after the lacquer has been removed. You will need to also use some great grade wet and dry paper to eliminate any acute corrosion.

Don't be the product, buy the product!